As opposed, engineered flooring has gained popularity among homeowners for its durability, style, and ease of installation. It’s a versatile choice that can even be installed over concrete, thanks to its superior moisture resistance compared to solid hardwood.

Be sure to read our blog for more information on hardwood flooring!

Preparing the Concrete Subfloor

Proper preparation of the concrete subfloor is crucial for a successful installation. It’s always best to call a professional, as they will know how to do the procedure. Nonetheless, let’s go over the steps.

Ensure the concrete is clean, dry, and level. Use a moisture meter to check the concrete’s moisture content. If it exceeds 5%, a moisture barrier is necessary.

If a moisture barrier is needed, lay down a layer of polyethylene sheeting over the concrete, overlapping seams by at least 6 inches and securing them with duct tape.

Afterwards, add an underlayment. It provides a cushioning layer and reduces noise. Select one compatible with your engineered flooring.

Installing the Engineered Flooring

With the subfloor prepared, it’s time to start installing your engineered flooring. Start by laying out a row of planks along the longest wall in the room, leaving a 1/4-inch gap between the planks and the wall to allow for expansion.

Then, use a notched trowel to apply a thin layer of adhesive to the concrete subfloor. Press the first plank into place on top of the adhesive. Use spacers to ensure consistent spacing between planks.

Lay subsequent rows, working your way out from the longest wall. Stagger the end joints for added structural integrity.

After installing all planks, be patient; wait for the adhesive to dry completely, which may take up to 24 hours.

Finishing Touches

Once the adhesive has dried, carefully remove the spacers, and the gaps between planks should now be uniform.

To protect your new engineered flooring from stains and scratches, consider applying a suitable sealant. You can also consider natural oil finishes.

In conclusion, installing engineered flooring on a concrete subfloor is a manageable DIY project that can yield professional-looking results. However, it’s always better to call an expert.